MacSeal BDM Pallet of 40 Boxes

$1,450.00

Check out this new Product from B&E Seal Coating. MACSEAL BDM CRACK SEALANT is a premium quality, high performance hot applied, single component joint and crack sealant. MacSeal BDM is a formulated blend of engineered asphalts, virgin polymers, synthetic rubbers, reinforcing fillers, antioxidants and UV inhibitors. MacSeal offers advanced low temperature bonding properties, prolonged resistance to degradation from weather and a positive seal during the expansion and contraction of the joint or crack. It remains ductile and highly resilient at low and high service temperatures.

Free Shipping Only Applies to Commercial Locations in the Continental United States. Re-Shipments, Re-Schedules & Residential Deliveries needing a lift-gate will incur extra charges.

Category:

Description

Check out this new Product from B&E Seal Coating. MACSEAL BDM CRACK SEALANT is a premium quality, high performance hot applied, single component joint and crack sealant. MacSeal BDM is a formulated blend of engineered asphalts, virgin polymers, synthetic rubbers, reinforcing fillers, antioxidants and UV inhibitors. MacSeal offers advanced low temperature bonding properties, prolonged resistance to degradation from weather and a positive seal during the expansion and contraction of the joint or crack. It remains ductile and highly resilient at low and high service temperatures.

  • Cures to a non-tacky finish 
  • Can be applied over a wide range of temperatures 
  • Engineered for moderate to cold climates 
  • Its flexible nature allows for quick relaxation during the build-up of thermal stresses in asphalt pavements, translating in enhanced field performance 
  • Easy to apply via gravity type mechanism (e.g. pour pot, walk behind units etc.) as well as via pump and hose/wand method 
  • Adheres very well to both hot mix asphalt and Portland cement concrete 
  • Engineered specifically for double boiler/oil jacketed kettles. Not recommended for direct fire melters. 
  • Prevents the intrusion of water and incompressibles into the cracks of asphaltic and Portland cement concrete pavements

Coverage  –

Weighs approximately 9.9 lb/gal (1.18 kg/L). A joint ½ x ½ “ (12.7 mm x 12.7 mm)

requires approximately 12.8 lb per 100 lineal feet or 19.0 kg per 100 lineal meters

Application Temperatures

Recommended Pouring Temperature 185°C (365°F)

Maximum Safe Heating Temperature 200°C (392°F)

McAsphalt Industries Limited is accredited to the quality standard ISO 9001 and to the environmental standard ISO 14001

Free Shipping Only Applies to Commercial Locations in the Continental United States. Re-Shipments, Re-Schedules & Residential Deliveries needing a lift-gate will incur extra charges.

Brand

McAsphalt

Additional information

Weight2000 lbs
Dimensions21 × 11 × 8 in