Description
Deery Super Stretch Crack and Joint Sealant – Pallet of 75
Do you want to make asphalt crack repair fast and easy? B & E Sealcoat has you covered with this amazing Crack and Joint Sealant. Use this hot-applied asphalt-based crack sealer to fill cracks in asphalt. Dries to drive-ready in just 30 minutes! DEERY Super Stretch Crack Sealer comes in 30 pound boxes for convenient lifting and fast melting. Just drop them in your asphalt kettle, melt, and go! This product can be used in oil-jacketed or direct-fired melters.
DEERY Super Stretch Hot Rubber Crack Material is a fast curing, premium quality, hot applied single component crack & joint sealant. DEERY is our best all-around hot applied crack sealant. Only the most appropriate high quality synthetic elastomers, polymers, and antioxidants meeting exacting standards are used in combination with select asphalt plasticizers and naturally occurring reinforcing materials. The sealant contains no solvent, is highly waterproof and resistant to a wide range of salts, bases, and organic materials. Super Stretch is tested for low temperature flexibility at -20°F (-29°C).
- Use for airports runways, municipal streets, parking lots, and filling gaps
- Waterproof and salt resistant – perfect for winters
- Road tested for hot desert summers
- Curing time – 30 minutes maximum
- Application Temperatures – 380 – 400 degrees F
Free Shipping Only Applies to Commercial Locations in the Continental United States. Re-Shipments, Re-Schedules & Residential Deliveries needing a lift-gate will incur extra charges.
Deery Super Stretch Hot-Applied Crack & Joint Sealant
Fast Curing Protection for Pavements That Can’t Wait
Deery Super Stretch is a premium, fast-curing, hot-applied crack and joint sealant designed for contractors who need speed without sacrificing performance. Often considered Deery’s best all-around sealant, Super Stretch combines high-quality synthetic elastomers, polymers, and antioxidants with select asphalt plasticizers to deliver exceptional flexibility, waterproofing, and durability.
This single-component, solvent-free sealant melts quickly, flows easily into cracks, and cures fast enough to return pavements to traffic in as little as 30 minutes. It’s a go-to choice for roads, airports, and parking areas where downtime matters and performance expectations are high.
Key benefits at a glance:
Fast curing with non-tracking performance in 30 minutes or less
Extremely high flexibility, stretching up to 1000 percent without failure
Proven low-temperature performance down to -20 °F
Low-viscosity flow for excellent crack penetration and clean installs
Zero VOC, solvent-free formulation
Think of Super Stretch like a high-performance bungee cord for pavement cracks. It stretches far, snaps back into place, and keeps sealing even as the pavement moves under traffic and temperature swings.
When productivity, reliability, and professional results all matter, Deery Super Stretch delivers long-term value with minimal disruption.
What Is Deery Super Stretch and Why Contractors Prefer It
Deery Super Stretch is a hot-applied, elastically modified crack and joint sealant engineered for high-performance pavement preservation. Its unique formulation balances fast melting, low viscosity, and above-average high- and low-temperature properties, making it a favorite among experienced applicators.
This sealant is well suited for:
High-traffic roadways
Airport runways and taxiways
Commercial and municipal parking lots
Asphalt and concrete pavements with active crack movement
Because Super Stretch cures quickly and resists tracking, it’s especially useful on projects where lane closures or access restrictions must be minimized.
How to Use Deery Super Stretch – Step by Step
Surface preparation
Cracks and joints must be clean and dry. Remove dirt, debris, vegetation, and moisture. Pavement temperature must be at least 40 °F at the time of application. In cooler conditions, warming with a hot air lance is recommended.Heating
Heat Super Stretch in an approved direct-fire or hot-oil jacketed melter equipped with constant mechanical agitation and a calibrated thermometer.
Minimum application temperature: 380 °F
Maximum heating temperature: 400 °F
Avoid prolonged heating at or above recommended temperatures, as overheating can permanently damage the material.
Application
Once minimum application temperature is reached, the sealant is ready for immediate use. Place material into the crack or prepared reservoir using:
Hand-held pour pot
Wheeled push bander
Wand applicator
Finishing
Squeegee excess material flush with the pavement surface. Avoid excessive over-banding to ensure optimal performance and appearance.Reopening to traffic
Under normal conditions, Super Stretch becomes non-tracking to moving traffic in 30 minutes or less.
Technical Specifications
Property: Cone Penetration @ 77 °F
Test Method: ASTM D5329
Specification: 75 dmm maximum
Property: Cone Penetration @ 122 °F
Test Method: ASTM D5329
Specification: 120 dmm maximum
Property: Flow @ 140 °F
Test Method: ASTM D5329
Specification: 1 mm maximum
Property: Elongation @ 77 °F
Test Method: ASTM D412
Specification: 1000 percent minimum
Property: Low Temperature Flexibility
Test Method: ASTM D3111 (modified)
Specification: Pass at -20 °F
Property: Softening Point
Test Method: ASTM D36
Specification: Minimum 200 °F
Property: Resilience
Test Method: ASTM D5329
Specification: 40 percent minimum
Property: Asphalt Compatibility
Test Method: ASTM D5329
Specification: Complete
Curing Time: Non-tracking to traffic within 30 minutes
VOC Content: 0 g/L
Frequently Asked Questions
How quickly can traffic return after application?
Super Stretch is designed to be non-tracking to moving traffic in 30 minutes or less, depending on conditions.
Is this sealant suitable for cold climates?
Yes. Super Stretch is tested for low-temperature flexibility at -20 °F, making it suitable for regions with frequent freeze-thaw cycles.
Why choose a fast-curing sealant?
Fast-curing materials reduce downtime, limit lane closures, and allow crews to complete more work in a single shift.
Can this be used in extremely hot climates?
Super Stretch is minimum for use in extreme high-temperature conditions. In consistently extreme heat, a higher-temperature-rated sealant may be more appropriate.
Can unused material be reheated?
Yes, provided prolonged heating is avoided and maximum temperature limits are not exceeded.
Why Deery Super Stretch Works Across the USA
From Midwest freeze-thaw cycles to busy commercial parking lots, Super Stretch is designed to flex, recover, and seal under real-world conditions. Like a shock absorber for pavement cracks, it absorbs movement instead of transferring stress—helping pavements last longer with fewer reactive repairs.
Packaging Options
Deery Super Stretch is available in:
30 lb cardboard boxes with quick-melt release film (75 boxes per pallet)
30 lb meltable packaging, sold by the pallet only
Both options are OSHA and GHS compliant, palletized for efficient handling, and suitable for outdoor storage.
For contractors who need speed, flexibility, and dependable results, Deery Super Stretch remains a trusted choice for professional crack sealing.
