Description
Everyone needs a way to distribute their sealant material try the Hot Rubber Crack Sealant Pour Pot. Whether its hot or cold this Pour Pot will get the job done. This is a full steel construction item offered to you by B & E Sealcoat. Quality meets efficiency.
- Distribute your asphalt crack filler material with our 2 gallon Pour Pot
- Made of 18-gauge steel
- Release material with the fingertip control valve
- Also used with cold pour crack sealants
- 7 1/2″ diameter X 26″ tall
- 10 lbs
Take Control of Every Crack Repair with Precision and Less Waste
When you’re sealing cracks, control and efficiency matter just as much as the material you’re using. The 2 Gallon Asphalt Crack Sealant Pour Pot with No-Drip Valve gives you both—helping you move at a steady pace while placing material exactly where it needs to go. Whether you’re working a residential driveway or touching up a commercial lot, this tool keeps your operation smooth and your results clean.
- Apply sealant with precision using a fingertip-controlled, no-drip valve
- Lightweight, mobile 2-gallon capacity keeps you moving without constant refills
- Built for Midwest and continental US conditions where freeze-thaw cycles demand tight crack sealing
- Reduces material waste and cleanup time, saving money on every job
- Delivers contractor-level results without complicated hose systems
From Michigan summers to unpredictable shoulder seasons, this pour pot helps you stay efficient and consistent. It’s like switching from pouring coffee out of a bucket to using a controlled spout—you immediately notice the difference in accuracy and mess.
Get more done in less time with cleaner results—add this pour pot to your crack sealing setup today.
How to Use the 2 Gallon Asphalt Crack Sealant Pour Pot
Using this pour pot is straightforward and designed for real-world jobsite efficiency:
- Heat your crack sealant in a stationary melter until it reaches proper application temperature
- Carefully transfer the hot material into the pour pot
- Position the pot over the crack line and begin walking at a steady pace
- Use the fingertip valve to control flow and ensure even application
- Follow immediately with a V-squeegee to push material deep into the crack
- Allow sealant to cool and cure before opening to traffic
For cold pour applications, simply fill the pot and apply directly—no heating required.
This process works much like using a watering can versus a hose. You’re not fighting pressure or overspray—you’re guiding the material exactly where it needs to go.
Technical Specifications
- Capacity: 2 gallons (also available in 2.6-gallon configurations)
- Material: 14–18 gauge steel construction
- Dimensions: approximately 7.5 inches diameter x 26 inches tall
- Weight: approximately 10 lbs
- Valve Type: No-drip, fingertip-controlled flow valve
- Nozzle Adjustment: 3/8 inch to 1/2 inch opening
- Design Options: Legs (standard), also available with wheels or long handle
- Application: Hot or cold asphalt crack sealant
- Compatibility: Works with stationary melters or cold-pour products
FAQ
How much area can I cover with a 2-gallon pour pot?
Coverage depends on crack width and depth, but typically 2 gallons will handle 100–300 linear feet of standard cracks.
Can I use this in cooler weather?
Yes, but for hot rubber applications, ambient temperatures should generally be above 40–50°F for proper adhesion. In northern states like Michigan, spring and fall applications should be timed during warmer parts of the day.
Does the no-drip valve really reduce waste?
Absolutely. The valve allows you to stop flow instantly, preventing puddling and over-application—especially important on detailed crack work.
Is this better than using a banding machine or wand system?
For smaller jobs, detail work, or tight areas, this pour pot offers more control and less setup. Larger projects may still benefit from melter-applicator systems, but this tool fills the gap perfectly.
Can it be used for both asphalt and concrete cracks?
Yes, it works for both surfaces when using the appropriate crack sealant material.
Do I need special training to use it?
No—if you can pour and walk steadily, you can use this tool effectively. It’s designed for both contractors and property maintenance teams.
Why This Works in Any Area of the USA
Across the continental United States, pavement faces different challenges—Michigan’s freeze-thaw cycles, Texas heat expansion, or Midwest moisture swings. This pour pot helps address all of them by ensuring sealant is placed cleanly and consistently into cracks, which is the first step in preventing water intrusion.
Water is the real enemy of pavement. Once it gets into cracks and freezes, it expands and causes further damage. By using a controlled tool like this, you’re not just filling cracks—you’re protecting the base layer underneath.
In colder climates, precise placement ensures tighter seals before winter hits. In hotter regions, it prevents over-application that can track or smear under high temperatures.
Use Case Scenarios
Residential Driveways
Perfect for homeowners or contractors doing maintenance work without investing in large equipment. Easy to handle and store.
Commercial Parking Lots
Ideal for touch-ups, edges, and detailed areas where large applicators can’t reach.
Property Managers
A cost-effective way to extend pavement life without hiring full-scale crews for minor repairs.
Sealcoating Contractors
A reliable backup or specialty tool for precision work—especially useful when detail matters.
What Makes This Pour Pot Different
Compared to other tools in the B&E lineup, this pour pot focuses on mobility and control rather than volume. It complements larger melter systems instead of replacing them.
Versus generic pour pots, the no-drip valve and adjustable nozzle give you better material control, which directly impacts job quality and material costs.
Compared to DIY alternatives, this is a professional-grade tool built from heavy-gauge steel—designed to hold up under repeated heating, handling, and jobsite use.
At the end of the day, it’s a simple tool that solves a common problem: getting sealant exactly where it needs to go without wasting time or material.
